Keeping an eye on your utilities is a good way to limit the impact of potential issues. Your plumbing system is no different, and it helps to be aware of the most common problems. Depending on the severity of the problem, you may be able to perform DIY plumbing repair on your own. Let’s examine 13 of the most common plumbing services and what it might take to address them.
Common Faucet Problems
Your home has various faucets in rooms like the bathroom and kitchen. Because faucets draw water from your plumbing, common problems can restrict or cut off water flow. In some cases you’re dealing with the opposite problem, which is too much water leaking out of the faucet.
Faucet Spout Is Leaking
What creates this problem? Faucets with two handles are known as cartridge-style faucets. These cartridges are valves that control water flowing into the spout. When a cartridge is damaged, it can result in a leak. It could also be a deteriorated valve seat, which links the faucet and spot together.
How do I fix it? Finding the broken or worn-down part and swapping it should resolve the leak. If it doesn’t, more than one component might be damaged.
Estimated repair cost: Replacement parts for the cartridges or valve seat can run around just a few dollars to around $80 depending on the make and model.
Faucet Base Is Leaking
What causes this problem? Most of the time, a leak near the base is because the seal or O-ring has worn out. Without a secure seal, water can push through the stem and start leaking.
How do I fix it? Sometimes the problem can be fixed with a thorough cleaning of the seal and O-ring. If not, the component will have to be swapped out.
Estimated repair cost: A single O-ring costs about $2. It may be a good idea to purchase a pack of several so that you can quickly take care of this plumbing repair job again the next time a leak shows up.
Faucet Is Leaking Under the Sink
What causes this problem? A loose connection is the most probable culprit. This might be where the sink’s pipes hook up to the main water supply as well as by the drain or P-trap connection. Particularly old faucets can be corroded to the point where they can’t sustain secure connections.
How do I fix it? Finding the source of your leak is important since this leak might not be immediately noticeable. If securing the connections doesn’t solve things, you’ll want to check the faucet itself.
Estimated repair cost: The cost to resolve things can vary depending on where the leak is coming from, particularly if water damage is found.
Common Toilet Problems
We depend on our toilets to operate cleanly and efficiently. If your toilet is experiencing a problem, you’ll want to check out these places first.
Toilet Is Clogged
What causes this problem? Even a partial clog can slow the drainage of your toilet. For many clogs, a trustworthy plunger will be your first line of defense.
How do I fix it? Lift the flapper valve to see how the toilet is draining. Slow or no drainage is a good sign there’s a clog. You should use a plunger to try to remove the clog, or a toilet snake if that doesn’t work.
Estimated repair cost: In many cases, eliminating a clog from your toilet won’t cost you a thing. When the plunger doesn’t work, the clog may be further in the pipes. At this point it may be a good idea to hire local plumbing services in Bend.
Toilet Is Running
What causes this problem? Toilets replenish their water supply from the tank after every flush. When excess water comes from the tank, it makes your toilet run constantly. Exchanging one or several parts should resolve things.
How do I fix it? It might be the float arm, the flapper or the refill tube as a problem with any of these parts can result in a running toilet. You can monitor the flushing/refilling cycle to pinpoint where the issue is.
Estimated repair cost: These components range in cost between $13 and $70. There’s a possibility the toilet is running simply because something has slipped out of place. In this case, it may be free to take care of your problem!
Toilet Is Leaking from the Tank
What causes this problem? Toilet tanks are manufactured from materials like porcelain. With the exception of damage to the tank itself, the leak is probably coming from a worn-down rubber seal secured to places like the bolts, the spud washer or the refill valve.
How do I fix it? Check the water level inside the tank, as you may be able to narrow down the leak’s location. You’ll then want to empty the tank and detach it from the toilet bowl. You will remove the fill valve and the connection bolts first, examining the spud washer when the tank is detached. Look for defective rubber or evidence of corrosion.
Estimated repair cost: These rubber seals are typically only a few dollars. If the tank itself is cracked, however, a replacement could cost more than $200. This may be a job for professional plumbing companies who handle the process quickly and efficiently.
Toilet Is Loose
What causes this problem? If your toilet feels wobbly or loose, it may be a damaged bolt or the wax seal ring running around the base. It can also be the toilet flange, which links the bowl to your home’s drainage system.
How do I fix it? Tightening the bolts is simple, as is replacing them. If the problem is the wax seal or the flange, you’ll want to be wary not to damage the toilet bowl. Some homeowners prefer having professional plumbing services in Bend when the toilet has to be disconnected.
Estimated repair cost: Replacement bolts are inexpensive, with replacement flanges averaging $20 or so.
Common Low Water Pressure Problems
Bad water pressure can make all sorts of household tasks more tedious and time-consuming. It’s especially annoying when it affects key fixtures including the showerhead or the kitchen sink.
Low Water Pressure in the Shower
What causes this problem? If your shower’s water pressure is too low, it could be a problem with a valve or mineral buildup within the showerhead. A dirty shower can be cleaned, but damage to the showerhead can make replacing it the most cost-effective option.
How do I fix it? Let the shower head sit in vinegar for a long time. This should remove sediment or other clogs. Adjusting the pressure valve may also help. If the pressure is still too low, swapping to another showerhead might resolve things.
Estimated repair cost: Cleaning the showerhead is free, and it’s suggested you try this first just in case. When swapping to another make and model, the cost will vary depending on what you decide on.
Low Water Pressure in the Kitchen Sink
What causes this problem? Two common causes of bad water pressure in your kitchen faucet are a clogged aerator or a clogged cartridge. The aerator is right up against the spout, depositing air into the water as it passes by. Cartridges control the flow of hot vs. cold water.
How do I fix it? Cleaning the aerator may resolve your water pressure problem. Replacing the faucet’s cartridges could also handle things.
Estimated repair cost: Replacing the aerator can cost around $5 and $25 depending on which model you get. Cartridges often average $45 to $60.
Common Drain Problems
A problem with your drain can slow cooking and cleaning down. And if it’s completely backed up, you’ll have to clear it before you can use the sink or tub again. Since drains are only designed to carry water out of your home, problems center around being unable to do so.
Drain Is Clogged
What causes this problem? Big objects, mineral buildup and other materials can accumulate in the drain, stopping it up. This can happen gradually or all at once depending on the nature of the clog.
How do I fix it? There are lots of options for clearing out drain clogs. Some chemicals can help force clogs into the rest of the plumbing while a drain snake reaches in and pulls solid material out. Deep clogs may need special attention.
Estimated repair cost: The cost for these materials is comparatively low, between $8 and $30. If you can’t remove the clog, local plumbing services in Bend can help.
Drain Is Slow
What causes this problem? This is most likely a clog in progress. It hasn’t completely blocked the drain yet, but an obstruction has formed.
How do I fix it? You can likely take care of this with chemicals or a snake. In a few cases it may fix itself, but you don’t want to risk it turning into a complete clog.
Estimated repair cost: Materials will probably cost between $8 and $30 based on brand choices. The particular nature of the clog could make one or the other more useful.
Common Burst Pipe Problems
A burst pipe is a serious issue that can affect not just your plumbing but areas of your home around it. Ultimately any burst pipe problem will be traced back to the damaged piping. In certain cases other problems like water damage or low water pressure will appear first.
Burst Pipe That’s Frozen
What causes this problem? Expanding ice or trying to wrench a frozen pipe free can cause this problem. Most homes are warm enough to keep the pipes from freezing, but severe cold and low use can result in freezing.
How do I fix it? You’ll want to wait until the pipe is thawed out before you can start repairs. The water supply will be turned off while the section of pipe is replaced. If water damage has occurred, you may need further plumbing repair.
Estimated repair cost: Costs will vary depending on the extent of the damage. Larger sections of piping are more expensive, especially if they are made from a high-quality material. You may pay anywhere from $30 to more than $150
Burst Pipe That’s Behind a Wall
What causes this problem? Damage, corrosion and even pests can lead to a burst pipe in your home. With the added trouble of the piping being hidden away behind a wall, this may be a task more appropriate for local plumbing companies in Bend.
How do I fix it? Replacing a broken pipe requires getting to the piping itself. This can be more problematic when the pipe is behind a wall. You might have to clear a large enough section away where work can be managed comfortably.
Estimated repair cost: This problem might need specialized tools and experience thanks to confined working conditions and corroded piping. If you don’t have this equipment on hand, the job may be more suitable for professionals. Expert plumbing repair can find burst pipes behind walls and resolve the problem. Average costs can vary significantly, usually around $150.